Welcome to official website, Jiangsu Dongju Machinery Technology Co., Ltd.!

诚信通.jpg

Sincerity 17 years

consultation hotline:

139-0141-5063

139-1466-1088

卧式带锯机
your current location : Home >> News >> Industry information

contact us

Jiangsu dongju machinery technology co., ltd.

Telephone:0086-515-69989788

Fax:69989787

Email:dtdjjx@126.com

Website:www.dtdjjx.com/en

Website:www.dtdjjx.com

Address: No.16, Xinhong National Pioneer Park, Tangyang Town, Dongtai City, Jiangsu Province

Five Factors Determining the Service Life of Horizontal Band Saw

2019-08-06

The following horizontal band saw machine introduces five factors that affect the service life of woodworking band saw machine: Using high-quality band saw machine, correct operation and adjustment of machine tool are important factors to ensure the service life of band saw blade. Good machine rigidity and machinability can prevent vibration and various stresses from affecting band saw blades. Select the band saw blade used correctly. No band saw blade is suitable for all sawing requirements, and saw blades of various forms and features have different effects, including appropriate blade width, tooth profile and pitch.

木工带锯机.jpg

Correctly use sawing parameters, mainly including saw tangent speed, feed rate, saw belt tension, etc. The ideal chip for sawing materials should be compact, silvery and have a warm hand feeling. If there are sintered, brown-blue, thick or powdery chips, the relevant parameters need to be adjusted. Properly use cutting fluid and its mixture to lubricate and cool band saw blades and clean accessories on serrations in time. Correctly "break-in" the new band saw blade. "Running-in" is the natural wear of the saw teeth, removing the burrs on the tooth edges, enabling the band saw blade to gradually enter the normal sawing state, avoiding premature fracture and curling of the saw teeth, especially when it is a profile, pipe and special-shaped material with sharp cross section. During "running-in", the machine parameters should be adjusted to about 50% of the normal sawing efficiency, and the sawing area is generally 200-600cm2. After abnormal conditions, gradually adjust the machine parameters to enter the normal sawing state. These are the relevant contents introduced to you by the sports car band saw manufacturer, hoping to be helpful to you.

Label

Last viewed:

Dongtai Tangyang Band Saw Machinery Co., Ltd.
(Jiangsu dongju machinery technology co., ltd.)


Address: No.16 Xinhong Machinery Pioneer Park, Tangyang Town, Dongtai City, Jiangsu ProvinceEmail:dtdjjx@126.com
Hotline: 139-0141-5063Tel: 0515-69989788