Working Principle and Maintenance of Numerical Control Sports Car Band Saw

The sports car band saw is one of the main wood processing machines, which uses band saw blades to saw straight lines of wood. The main structure consists of the following five parts: a base body, the main body, upper and lower wheel saws, saw clips and a blade tensioner. The changed product has the advantages of reasonable structure, reliable performance, stable operation, simple operation, high production efficiency and wide application range. The coupling stage can be sawing wood or recording on a corresponding plane; The sheet can also be sawed to improve the utilization rate of wood, leather or edge contour; The width of the worktable plate installed on the cutting machine may not be 600MM larger than the diameter of the log length cut from the intermediate sheet and sawed in woodworking sports competitions. Especially for collective work and individual processing, wood processing and wood products manufacturing ideal woodworking machinery. Application, Structure and Working Principle of Moving Band Saw In the production and processing of solid wood flooring, the main function of the sports car band saw is to cut logs into sawn timber for subsequent production according to the floor size and wood shrinkage characteristics.

Band sawing machine is a machine tool that uses closed and non-caused band sawing blades to tighten on two rotating saw blades to push the sports car band sawing machine to move continuously and evenly in one direction to cut wood. It mainly consists of bed, saw blade, upper saw blade lifting device, belt saw blade tensioning device, saw blade guide device, workbench, guide plate, etc. The bed is made of cast iron or steel plate welded. The so-called sports car band saw machine refers to a band saw machine with a saw blade with a pair of clamps. 

Numerical control band saw movement maintenance vehicle

One. Strictly abide by the safe operation rules of the machine; 2, saw section to clean, flat, consistent and sharp teeth; 3. The saw blade has no burr, curly teeth, smooth joint and 5 cracks. 4. Proper tightness and position of blades; Five. Guide rail bracket, correct position, no wear on rollers, flexible rolling; 6, pulley saw wheel plate without crack, not loose, normal rotation; 7. Sensitive bearing adjustment and firm positioning; As shown in fig. 8, the counterweight is positioned correctly and reliably. Number 9. The parts are firm, clean, free of scratches, flexible in movement and reliable in positioning. 10. Shield is complete, complete and fixed. 11. The motor is not loose and rotates normally. In fig. 12, the power control switch is usually sensitive; The power supply lines shall be clean and tidy, the insulation shall be fixed reliably, and there shall be no aging, peeling, damage and other phenomena. 14, oil cup (hole) clean and oil, lubrication tools clean is complete; 15. The equipment has clean appearance and complete components. 16. Make inspection and maintenance records to ensure that the machine is in good condition.