Production of Woodworking Band Saw

Woodworking band saw

operative skills

For carpenter's machine tools fixed with special operators, it is necessary for the operators to pass the examination and hold the "Equipment Operation Certificate" of the machine tools before operation. There is no carpenter's machine tool operated by a fixed person, so that only personnel with the "Equipment Operation Certificate" of the machine tool can use the machine tool.

Carefully implement the following general rules for woodworking machines:

(a) carefully before homework: 

1, fixed with special operation of the machine tool, the operator should carefully read the shift records, know the previous machine tool operation status and problems. 

2, check the machine tool and the job site, if there is any irrelevant debris should be removed. 

3, check the safety protection equipment should be completely intact. Machine tools without protective equipment are forbidden to operate. 

1, check the operation should be in the direction of the homework.

2, check the electrical distribution box should be closed and reliable, electrical grounding is outstanding. 

3, check the smooth oil storage parts of the oil quantity should be enough, outstanding seal. Oil mark, oil cup, oil nozzle, etc. shall be complete, the device shall be correct, and the oil eye shall not be blocked. Add oil according to smooth chart rules. 

4, parking more than one class of machine tools should be empty operation test, admit normal operation rear can work.

(2) in the homework carefully: 

1, fixed with special operation of the machine tool, the operator should stick to their jobs, careful operation, do not do things that have nothing to do with homework. When leaving the machine tool, park the car and cut off the power supply. There is no specific machine tool to be operated. After using the machine tool, the operator should park the car and cut off the power supply. 

2, cutting tools, wood should be clamping correctly, fastening is reliable. 

3. For mechanical speed change of transmission and feed, it is necessary to park the machine after the cutter is separated from the workpiece. 

4, pay attention to wood can not have nails, beware of damage to the tool. 

1. Pay close attention to the working condition, smoothness, temperature rise and sound condition of the machine tool. If any abnormal phenomenon is found, the machine tool shall be parked immediately for inspection. The machine tool shall not be operated until the problem is solved. 

2, the machine tool should be parked immediately when an incident occurs, adhere to the scene of the incident, state the relevant departments to analyze the disposal.

(3) after the homework carefully to: 

1. Place the operation handle on the non-operation position to block the power supply. 

2. Wipe the machine tool clean and clean the operation site. 

3, fixed with special operation of the machine tool, the operation should be found in the class machine tool questions to fill in the shift record book, do a good job in succession.