Telephone:0086-515-69989788
Fax:69989787
Email:dtdjjx@126.com
Website:www.dtdjjx.com/en
Website:www.dtdjjx.com
Address: No.16, Xinhong National Pioneer Park, Tangyang Town, Dongtai City, Jiangsu Province
Five Factors Affecting Service Life of Woodworking Numerical Control Band Saw
First, the use of high-quality band saw machine, the correct operation and adjustment of the machine tool is to ensure the most important factor in the life of the woodworking band saw machine band saw blade. Good machine rigidity and machinability can prevent vibration and various stresses from affecting band saw blades.
Second, choose the right band saw blade. No band saw blade is suitable for all sawing requirements, and saw blades of various forms and features have different effects, including appropriate blade width, tooth profile and pitch.
Third, the correct use of sawing parameters, mainly including saw tangent speed, feed rate, saw belt tension, etc. The ideal chip for sawing materials should be compact, silvery and have a warm hand feeling. If there are sintered, brown-blue, thick or powdery chips, the relevant parameters need to be adjusted.
Fourth, properly use cutting fluid and its mixture to lubricate and cool band saw blades, and clean accessories on serrations in time.
Fifth, correctly "running in" the new band saw blade. "Running-in" is the natural wear of the saw teeth, removing the burrs on the tooth edges, enabling the band saw blade to gradually enter the normal sawing state, and avoiding premature fracture and curling of the saw teeth. It is especially important when it is a profile, pipe and special-shaped material with sharp cross section. During "running-in", the machine parameters should be adjusted to about 50% of the normal sawing efficiency, and the sawing area is generally 200-600cm2. After abnormal conditions, gradually adjust the machine parameters to enter the normal sawing state.
These are the related contents introduced by the horizontal band saw machine, hoping to be helpful to everyone.
Address: No.16 Xinhong Machinery Pioneer Park, Tangyang Town, Dongtai City, Jiangsu Province | Email:dtdjjx@126.com |
Hotline: 139-0141-5063 | Tel: 0515-69989788 |