Telephone:0086-515-69989788
Fax:69989787
Email:dtdjjx@126.com
Website:www.dtdjjx.com/en
Website:www.dtdjjx.com
Address: No.16, Xinhong National Pioneer Park, Tangyang Town, Dongtai City, Jiangsu Province
Matters needing attention in operation of sports car band saw machine
(1) All safety protection measures must be installed accurately before using the band saw machine to ensure working under safe conditions.
(2) The safety device can be disassembled only when the total power supply of the machine tool is turned off.
(3) The operator must know all safety instructions and danger tips on the machine tool.
(4) Operate the machine tool only when all safety devices are under stable working conditions.
(5) After the machine tool is started, make sure that no one will be hurt due to the start of the machine tool.
(6) Every minor mistake or fault should be paid enough attention and the machine tool should be checked about once.
(7) All work such as transportation, installation, commissioning and maintenance can only be carried out by professional personnel.
(8) For the installation and maintenance of machine tool electricity, it is necessary to replace those electrical workers who have relevant knowledge level and are familiar with the field of mechanical transmission.
(9) Check the electrical equipment regularly and deal with all loose or burnt electrical fittings in time.
The main cutting motion of the saw blade is unidirectional and continuous, so it is easier to increase the cutting speed. Woodworking band saw machine can use single saw to make talent, realizing reasonable saw is helpful to improve the yield and quality of finished products. A thin saw blade can be used on a band saw machine, the saw path is narrow, and the loss of saw dust can be relatively reduced.
Address: No.16 Xinhong Machinery Pioneer Park, Tangyang Town, Dongtai City, Jiangsu Province | Email:dtdjjx@126.com |
Hotline: 139-0141-5063 | Tel: 0515-69989788 |