Welcome to official website, Jiangsu Dongju Machinery Technology Co., Ltd.!

诚信通.jpg

Sincerity 17 years

consultation hotline:

139-0141-5063

139-1466-1088

卧式带锯机
your current location : Home >> News >> Company news

contact us

Jiangsu dongju machinery technology co., ltd.

Telephone:0086-515-69989788

Fax:69989787

Email:dtdjjx@126.com

Website:www.dtdjjx.com/en

Website:www.dtdjjx.com

Address: No.16, Xinhong National Pioneer Park, Tangyang Town, Dongtai City, Jiangsu Province

Cause of Noise in Moving Table of Sports Car Band Saw

2019-07-08

The lathe bed of the full-automatic woodworking band saw machine is made of cast iron or steel plate welded. The saw wheel is divided into a strip saw wheel and a plate saw wheel. Generally, the lower saw wheel of the vertical saw is the driving wheel, the upper saw wheel is the driven wheel, and the upper saw wheel lifting device is used for loading and unloading and adjusting the tightness of the band saw blade. The upper saw wheel tilting device is used to prevent the band saw blade from falling off the saw wheel during sawing. The band saw blade tensioning device can endow the upper saw wheel with elasticity to ensure the stability of the tensioning degree of the band saw blade in operation; The old type uses spring or lever weight mechanism, while the new type uses pneumatic and hydraulic tensioning devices. The guide device is commonly called saw card to prevent the band saw blade from twisting or swinging during sawing. The lower saw card is fixed at the lower end of the lathe bed, while the upper saw card can be adjusted up and down along the vertical slide rail. The saw card structure has roller type and slide type, and the slide type is made of hardwood or wear-resistant plastic.

精密跑车.jpg

Cause of Noise in the Moving Table of Band Saw

Too much dust accumulation for cleaning and maintenance The movable beam box in the swing arm of the machine tool cannot move freely. There is too much dust in the swing arm and on the movable beam box. The rollers in the swing arm are improperly adjusted for cleaning and maintenance of the machine tool. Check that the dust-proof brush is adjusted to the proper position. The size sawed with the vertical ruler is not allowed to be displaced in the left and right positions of the vertical ruler. Re-adjust the left and right positions of the horizontal ruler or the horizontal ruler and tighten the sawed plate. The diagonal size error is too large.

1. The longitudinal guide ruler is not parallel to the saw blade 

2. The transverse guide ruler is not perpendicular to the saw blade

Resolution:

1. Adjust the parallelism between the longitudinal scale and the saw blade 

2. Adjust the vertical of the horizontal guide ruler and the saw blade

These are the related contents introduced to you by the horizontal band saw machine manufacturer, hoping to be helpful to you.

Label

Last viewed:

Dongtai Tangyang Band Saw Machinery Co., Ltd.
(Jiangsu dongju machinery technology co., ltd.)


Address: No.16 Xinhong Machinery Pioneer Park, Tangyang Town, Dongtai City, Jiangsu ProvinceEmail:dtdjjx@126.com
Hotline: 139-0141-5063Tel: 0515-69989788