Telephone:0086-515-69989788
Fax:69989787
Email:dtdjjx@126.com
Website:www.dtdjjx.com/en
Website:www.dtdjjx.com
Address: No.16, Xinhong National Pioneer Park, Tangyang Town, Dongtai City, Jiangsu Province
Points for Attention in Use of Horizontal Band Saw
1. The horizontal band saw machine lifts the saw upward as much as possible to prevent the tooth tip from grinding or grinding wood, so as to protect the sharpness of the chisel edge.
2. A person's head can be slightly left, but do not use a saw. The head is tilted to the right, so walking is easy and the cavity is fatigued.
3. Eyes should be as close to the longitudinal direction of the sawing target as possible, and both sides of the saw blade can be seen from the line of sight.
4. To avoid body movement, only the arm can be moved, causing difficulty in the arm, local endurance can't stand it, and the length of saw blade moving up and down is short, resulting in the consequence that the big saw cannot be used.
5. Prevent the chest from moving up and down excessively and add extra burden to the waist.
6. Eliminate excessive bending and work, but do not pay attention to the waist movement, the human body produces serious weight, plus work, the waist will soon produce soreness, or when the waist is bent can't feel, has been back pain, affecting the continuous work.
7. When the horizontal band saw is operated for a long time, the left palm of the saw back will sometimes foam. It can be pulled by a small wooden block and then clamped on the back of the saw near the upper saw button, which can be avoided by covering the small wooden block with your hand.
For double use, it is mostly used under the conditions of high precision, thick sawing thickness and hard material. When in use, there are three kinds of saw cleaning: double hands, double hands, upper saw and lower saw. The stable direction of the sawed piece can be horizontal, vertical and inclined, but the saw section must be vertical. The division of labor is that the upper saw uses more force than the hand saw and uses less force to feed the saw. The lower saw saw uses more force to brake the saw, while the upper saw blind saw uses less force. When the woodworking band saw machine is operated, the upper and lower saw hands must coordinate and work hard. The beginning is steady, accurate and firm, the middle is firm, and the saw is light but weak.
Address: No.16 Xinhong Machinery Pioneer Park, Tangyang Town, Dongtai City, Jiangsu Province | Email:dtdjjx@126.com |
Hotline: 139-0141-5063 | Tel: 0515-69989788 |